There are various things that considered for a cell capacity. For example, # of max user that can be in RRC-Connected mode, how many resource blocks are being used (bandwidth).
I formula/ equations that will enable me calculate the capacity/throughput of GSM base station, UMTS base station and LTE eNodeB. If there are simulation software, can someone please kindly tell me how to get them and use them.
When source enodeB triggers Handover Required message to MME. It just has Target ID ( which just tells about the target eNodeB Id ) not at the cell level granularity . My concern is how target eNodeB figure out which of the cell out of 256 cells, need to be prepared for the received handover request message. Is there any IE carry such information within Handover Required or handover request message ?
From UE capability Information enodeB will get to know the max DL/UL MCS supported by UE. Then How UE knows the max DL/UL MCS supported by enodeB.
On what basis, source eNodeB decides to consider RSRP or RSRQ for neighbor cell power measurement ?
