top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

what are the possible things should take care to skip scheduling on some special subframes ?

+1 vote
253 views

As per specification 36.213, "For the special subframe configurations 0 and 5 with normal downlink CP or configurations 0 and 4 with extended downlink CP, there shall be no PDSCH transmission in DwPTS of the special subframe."... To skip scheduling of PDSCH(New or retrx) on these special subframe What are all possible things should take care? And how can it be acheived ?

posted Nov 23, 2016 by Suchakravarthi Sripathi

Looking for an answer?  Promote on:
Facebook Share Button Twitter Share Button LinkedIn Share Button

Similar Questions
0 votes
What and all we need to take care while porting the linux bsp from scratch?

building bootloader or configuring bootloader or building rootfs from scratch

0 votes
Can we skip one DL scheduling in configured grant?

If gNB doesn't have resource to schedule in configured grant SF? Can gNB skip this scheduling? What is the UE behavior?

+3 votes
In LTE, if MAC keeps on toggling between "in_sync" snd "out_sync" states, what action should L3 take?

In one use case, I observed that MAC is constantly toggling between "in_sync" snd "out_sync" states. So, every-time MAC forwards this indication to L3 (e.g., to RRC first and RRC sending to RRM), it is sending RRC Connection Reconfiguration to that UE with CQI and SR configurations, with exactly same values.
The reason for the behavior at MAC is not yet clear to me. Maybe due to DRX configuration. But, it is sending out of sync indication to L3 as radio link failure is getting detected by MAC for uplink. Although, actually RLF has not happened.
So, my doubt is that L3 to send exactly same copies of RRC Connection Reconfiguration is how justified? As there is a long sequence of RCRs is going on and each message is being sent in around 5-6 seconds interval.

...