top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

How voice packets flows through IMS network and reach to end user?

0 votes
597 views

Volte: How ip packets flows through the IMS network when voice call initiated by user. Will ip packets goes through the CSCF nodes or through which IMS nodes it will flow to reach the end user.

posted Feb 28, 2017 by anonymous

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

1 Answer

0 votes

For VoLTE service, network and UE exchange SIP signalling messages and once the SIP signalling is completed data flow in form of RTP packets start flowing between end users.
1. UE sends RTP packets to eNodeB using QCI = 1 bearer
2. eNodeB forwards to SGW and SGW to PGW
3. PGW sends packets to MRF components of IMS network
4. MRF sends packet so SBC (Session Border Controller)

answer Mar 1, 2017 by Harshita
from SBC how it will transfer to end user.
commented Mar 1, 2017 by anonymous
Similar Questions
+3 votes
"Homogeneous Support of IMS Voice Over PS Sessions" in S6a ULR

Referring to the 3GPP 29.272 the "Homogeneous Support of IMS Voice Over PS Sessions " AVP is set to TRUE in the ULR means that the serving MME can provide the IMS voice support homogeneously in all TA assigned to it.
Does the MME insert this AVP in the ULR message only if the UE required voice service over IMS during the attach procedure.
In other word, if this AVP is present in the ULR, can we conclude that the UE support Voice call over IMS (VOLTE).

In the same context, if this AVP is absent ("Homogeneous Support of IMS Voice Over PS Sessions ")m can we conclude that either the MME does not support VOLTE at all or the UE does not support it (but only CSFB?

+2 votes
LTE: Does IMS takes part in voice transmitting or is it omitted?

I need to investigate VoLTE subject and till now I have come to following conclusions - please check them and correct if I am wrong.

Originating terminal (UE1) sends SIP invitation to terminating terminal (UE2) (both in LTE network) via SGW -> P-GW-> (IMS) P-CSCF -> S-CSCF and back in the same way to UE1. Is it correct? And whether IMS takes part in voice transmitting or is it omitted?

+2 votes
LTE: Why a separate default bearer is required to exchange SIP signalling messages between UE and IMS network ?

Is it mandatory to establish a separate default bearer to exchange IMS signaling messages between UE and IMS network nodes ? Can't internet default bearer be used for the same ?

+3 votes
Is it necessary HSS and S-CSCF both the nodes belongs to home network for an IMS call ?

Is it possible HSS belongs to home network and S-CSCF belongs to visited network for the Cx interface ? If not then why ?

...