top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

Filling the measurement configuration for UE

+4 votes
438 views

Suppose i want to Intra frequency measurement .

ENB1 - Freq - 1000 (PCI - 2)
ENB2 - Freq - 1000 (PCI - 5)

So how can i configure the Measurement config ???

posted Mar 14, 2014 by Sachidananda Sahu

Looking for an answer?  Promote on:
Facebook Share Button Twitter Share Button LinkedIn Share Button

Similar Questions
+2 votes
How Drx configuration is usefull for UE to perform ECGI measurement ?

According to 3Gpp spec 36.331 for EUTRA , in RRC measurement configuration if purpose set to REPORTCGI, then T321 timer will be set to 1 sec.

If this is the case then where UE will use this Drx configuration? Please can any one explain me this...

0 votes
When does eNodeB send measurement gap configuration for the first time to a UE in live network?

When does eNodeB comes to know that UE wants to do an IRAT handover in the live network?
Or, eNodeB always sends the measurement gap config info in the RRC connection reconfiguration message which has the measconfig IE?

Without knowing the measurement gap configuration, how does the UE perform inter frequency measurements?
Is it something like, the NodeB sends the meas gap config info to UE after succesful attach?Because UE needs to measure other frequency cells both during idle mode and connected mode.
Please clarify.

...