top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

How UE got to know about Service Types and when to switch between the services in LTE?

+1 vote
676 views
How UE got to know about Service Types and when to switch between the services in LTE?
posted Jun 16, 2014 by Dilbagh

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button
can you please elaborate your question a bit more ?

1 Answer

0 votes

The action of camping on provides access to services. The network provides different levels of service to a UE in either Idle mode or Connected mode. Three levels of services are defined:

LIMITED SERVICE: emergency calls on an acceptable cell.
Acceptable cell: UE may camp to obtain limited service like emergency call. The minimum set of requirements for initiating an emergency call in a UTRAN network are:

• The cell is not barred.
• The cell selection criteria are fulfilled.

NORMAL SERVICE: for public use on a suitable cell.
Suitable cell: UE may camp on to obtain normal service. Such a cell shall fulfill all the following requirements:

• The cell is part of the selected / registered / equivalent PLMN
• The cell is not barred
• The cell is not part of a forbidden registration area
• The cell selection criteria are fulfilled
• In case of a CSG cell it is part of the white list

OPERATOR SERVICE: FOR OPERATORS ONLY ON A RESERVED CELL.
Reserved cell: When the cell status “reserved for operator use” is indicated and the Access Class of the UE is 11 or 15 the UE may select/re-select this cell if in Home PLMN. Set by O&M parameter.

answer Jun 17, 2014 by Anuradha Tabyal
Similar Questions
+1 vote

Will the encryption of traffic between eNB and LTE core network be implemented in LTE networks? Will cellular operators apply IPsec encryption over communication links between LTE eNodeB and SAE Gateway or LTE core network?
Isn’t IPsec encryption a mechanism which each subscriber may decide to use (or not) between the UE and its peer?

+1 vote

Assume I configured XYZ as APN but trying to attach to network. How APN validation work here. Is it bi-directional or uni-directional validation ? Please explain in detail.

...