top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

SRS configuration in RRC connection reconfiguration message

+2 votes
700 views

What is the utility of srs configuration in RRC connection reconfiguration message, observed that enodeB is sending multiple RRC connection reconfiguration message within a period of 1 minute approx trying to configure srs to UE, what does this hint or mean...

posted Dec 17, 2015 by Rajib Samui

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

1 Answer

0 votes

The main objective behind SRS-configuration is to get uplink channel estimation feedback from the UE for different region in frequency domain. This is mainly required by eNodeB to allocate the uplink radio resources in better region of frequency domain.

answer Dec 18, 2015 by Harshita
Hi harshita.

Thanx for the information .. So what I understood is using the srs from the UE, enodeB assigns resources(what does these resources mean - is it Resource elements/PRBs) in the frequency domain for uplink PUSCH .. Now wanted to know does this SRS has any relation to the PHR(power headroom report)sent by UE to enodeB .
commented Dec 18, 2015 by Rajib Samui
Similar Questions
+2 votes
When ENB will send measurement configuration in RRC Reconfiguration Message?

Is their any triggering point ENB has to send Measurement consfiguration to UE.

Generally measurement configuration will come in RRC Reconfiguration message.At intall attach procedure ENB will send RRC Connection Reconfiguration message to send SRB2 and DRB configuration.

So,My question what is the triggering point to send Measurement configuration.

+2 votes
LTE: Why UE does not "attach complete" message along with "RRC Connection Reconfiguration Complete" ?

During attach procedure, UE sends "Attach Request" along with "RRC Connection Setup Complete", eNodeB sends "Attach Accept" along with "RRC Connection Reconfiguration then why UE does not send "Attach Complete" along with "RRC Connection Reconfiguration Complete" message ? What could be the reason for defining the messages so ?

...