top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

In Network initiated detach at MME which UE Id is used ?

+3 votes
589 views

In network initiated detach the triggering point is MME. There are different types of detach like reattach required, IMSI detach.
In case of reattch required(OAM detach) which UE ID is used at MME as triggering entity?

posted Feb 9, 2016 by Patil Shahaji

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

1 Answer

0 votes

When MME triggers detach procedure with the cause "re-attach required " then in that case, UE will trigger attach procedure along with the GUTI since it is going to re-connect to the same MME. In case of network initiated detach procedure , MME does not include GUTI since there is no use by including this IE in detach request message.

answer Feb 9, 2016 by Vimal Kumar Mishra
Sir, I am triggering network initiated detach from OAM for EPS services for particular UE. But my problem is at OAM I should have UE ID for UE which I am going to detach. So my question is which UE Id should I use. Is it M-TMSI?
commented Feb 10, 2016 by Patil Shahaji
Similar Questions
+2 votes
LTE: Please explain the procedure of Detach Request (Network Initiated) in detail?

Can somebody please explain the procedure of Detach Request if it is triggered by Network.?

+2 votes
Detach type in network initiated detach

My question is when will MME initiate detach request with detach type as IMSI detach. I know that IMSI detach will happen when MME wants the subscriber to move out of non-eps service and move the association with the MSC to GS-NULL state .

In the network to UE direction:
Bits
3 2 1
0 0 1 re-attach required
0 1 0 re-attach not required
0 1 1 IMSI detach
1 1 0 reserved
1 1 1 reserved

I searched through all the spec but couldn't find a spec ref when will MME initiate detach request with detach type as IMSI detach.

...