top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

What is meant by NASS bundled authentication scheme, gprs ims bundled authentication scheme, sip digest auth scheme?

+3 votes
896 views

What is meant by NASS bundled authentication scheme, GPRS IMS bundled authentication scheme,sip digest authentication scheme and what is the difference between them and on what conditions the are chosen?

posted Jul 27, 2016 by Vakati Abilasn

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

1 Answer

+1 vote

All of them are used for IMS authentication, In early days when IMS was being deployed full flexed security system was not in place.
Earlier IMS system was relying on different authentication procedure to consider an UE authenticated. In NASS-IMS bundled authentication, IMS considers UE as authenticated based on network authentication.
In case of GPRS-IMS bundled authentication (GIBA), IMS sub system relies on GPRS authentication. There is no separate IMS authentication procedure is required.
SIP digest authentication scheme is the one which comes under the IMS authentication.

answer Jul 27, 2016 by Harshita
Does this mean that all the three authentication schemes will be present for a single IMS authentication (NASS bundled IMS authentication,GPRS bundled ims authentication,sip digest authentication)
Similar Questions
+1 vote

QCI 5 is mandatory for IMS SIP Signalling? What If Network assign different QCI (Say 6 or 8) for IMS Default Bearer? Will SIP Signalling still flow?

+2 votes

Is it mandatory to establish a separate default bearer to exchange IMS signaling messages between UE and IMS network nodes ? Can't internet default bearer be used for the same ?

0 votes

In IMS VoLTE setting of a telecom network, what part/field of which type of packet (SIP, SDP, others...) gives authentic information of MSISDN-IP mapping? From a sample traffic, I need to find out information from control traffic about what IP is assigned to what phone number. In the sample traffic, I see a lot of protocols (SIP, SDP, RTP, DIAMETER, ISUP, ....). I require to find out IPs assigned to phone numbers. I know RTP flows between end devices (phones), but I need to find out IPs before the call is established...

...