top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

what is eICIC in lte ?

+1 vote
292 views

What is the objective behind to introduce eICIC ?

posted Sep 13, 2013 by Neeraj Mishra

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

2 Answers

+1 vote
 
Best answer

This was introduced in release 10 and is part of the heterogeneous network (HetNet) approach, where macro cells are complemented with pico cells inside their coverage area (hotspots in shopping centers, at airports, etc.). While the macro cells emit long range high power signals, the pico cells only emit a low power signal over short distances. To mitigate interference between a macro cell and several pico cells in its coverage area, eICIC coordinates the blanking of subframes in the time domain in the macro cell. In other words, there is no interference in those subframes from the macro cell so data transmissions can be much faster. When several pico cells are used in the coverage area of a single macro cell overall system capacity is increased as each pico cells can use the empty subframes without interference from the other pico cells. The downside is of course that the macro cell capacity is diminished as it can't use all subframes. Therefore, methods have to be put in place to quickly increase or decrease the number of subframes that are assigned for exclusive use of in pico areas when traffic patterns change.

answer Sep 14, 2013 by anonymous
+1 vote
answer Sep 13, 2013 by Vimal Kumar Mishra
Similar Questions
+1 vote

If ABS subframe of serving cell coincide with PRS of serving cell, how we are going to handle this situation: Are we going to schedule PRS? or we going to consider it simply ABS subframe?

0 votes

In LTE , after successful completion of attach-process , i want to fail the dedicated radio bearer , which is initiated by PGW ,what is the procedure to fail the dedicated radio bearer

+2 votes

We know that a cell can broadcast up to six PLMN and first PLMN in the broadcast list is known as primary plmn and others known as secondary or non-primary PLMN. I want to know whic all places their significance come out ?

+1 vote

In LTE , ping time is high in some sites 300 ms, what could be reason to high ping time?

...