top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

QCI 5 is mandatory for IMS SIP Signalling?

+1 vote
1,429 views

QCI 5 is mandatory for IMS SIP Signalling? What If Network assign different QCI (Say 6 or 8) for IMS Default Bearer? Will SIP Signalling still flow?

posted Apr 3, 2017 by Anand Yadav

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

1 Answer

+1 vote

Hi,

Yes it is possible and depends on operator. because no one restricts the IMS signalling in particular bearers. QCI 5 is having higher priority so that IMS signalling will be reliable but if you don't have QCI 5 still you can transfer IMS signalling on any bearers if operator don't have any restriction policy. Mainly restriction comes to maintain quality of service, because assume you are transferring IMS signalling in some other bearer and it dropped because of some reason then user will face bad experience this is why they use only QCI 5 so that it will not drop.

Note : No 3GPP spec says restrict particular data or signalling on particular bearers. It is up-to operator configuration.

answer Apr 4, 2017 by Jaganathan
Thanks Jaganathan
commented Apr 4, 2017 by Anand Yadav
Similar Questions
+2 votes
LTE: Why a separate default bearer is required to exchange SIP signalling messages between UE and IMS network ?

Is it mandatory to establish a separate default bearer to exchange IMS signaling messages between UE and IMS network nodes ? Can't internet default bearer be used for the same ?

0 votes
In IMS VoLTE call, how to identify IPs assigned to phone numbers from control traffic (SIP, SDP …)?

In IMS VoLTE setting of a telecom network, what part/field of which type of packet (SIP, SDP, others...) gives authentic information of MSISDN-IP mapping? From a sample traffic, I need to find out information from control traffic about what IP is assigned to what phone number. In the sample traffic, I see a lot of protocols (SIP, SDP, RTP, DIAMETER, ISUP, ....). I require to find out IPs assigned to phone numbers. I know RTP flows between end devices (phones), but I need to find out IPs before the call is established...

...