top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

LTE: Which procedures can be triggered by UE when it moves from RRC idle to connected mode ?

0 votes
2,123 views
LTE: Which procedures can be triggered by UE when it moves from RRC idle to connected mode ?
posted Jan 19, 2018 by Ganesh

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

2 Answers

+2 votes

On RRC Layer, the RRC CONNECTION SETUP PROCEDURE can be triggered.

answer Jan 20, 2018 by Qing Zhou
0 votes

After Rach procedure UE sent RRC Connection Request Message to the Enodeb for UE to moves from RRC_IDLE to RRC_CONNECTED Mode.

answer Feb 15, 2021 by Yusuf Amanullah
Similar Questions
+11 votes
LTE: In RRC connected mode, when an UE moves from one cell to another cell what messaging happen ?

If I am right, an eNodeB can support multiple cells and each cell has different pci.
Now suppose enodeB has two cells i.e cell1 and cell2. If I am going right, both the cell(s) should have different PCIs.
I have assumed UE is attached to cell1 and due to mobility, it is moved to cell2. During this movement, what message shall be exchanged between UE and enodeB. And Is there any message send to MME regarding the new cell ?

0 votes
why eNB sends rrc reconfiguration to connected UE when we add or modify inter frequency for SIB5 on eNB

why eNB sends rrc reconfiguration to connected UE when we add or modify inter frequency for SIB5 on eNB
As i understand, UE reads SIB5 after reading paging in idle mode. Why RRC reconfig is required at this time ?

...