top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

EnodeB power is same for all bands ?

+1 vote
299 views

We know that LTE has 1.4MHz, 3MHz, 5MHz, 10MHz, 15MHz, and 20MHz spectrum bands and what i have learned that E-NodeB transmitting power is 46dBm for 20 Mhz band. Will it be same for other bands ?

posted Mar 29, 2014 by Pankaj Deshmukh

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

1 Answer

0 votes

These values: 46dBm for bands 10, 15, 20MHz and 43dBm for 1.4, 3, 5MHz are given in the specification 3GPP TS 36.942, which provides models (of environment, UE and eNB) to be used in system level simulations. However, the standard does not specify the transmit power of eNB, beyond that it shall be defined by the local regulator and manufacturer.

answer Mar 31, 2014 by Tapesh Kulkarni
Similar Questions
+4 votes
Does an eNodeB use same IP address for all the interfaces ?

An eNodeB in LTE has many interfaces like M2, X2, S1-C , S1-U . What could be the possible deployment case ? Will all interfaces use same IP address as transport or different IP addresses for each interface ?

+2 votes
LTE: Does all cells belong to the same eNodeB must have the same DRX cycle ?

If my following understanding is correct then please provide your comment/answer.
- S1 setup procedure is done by at eNodeB level rather than a cell level granularity.
- All the cells belong to same eNodeB follow the same DRX configuration.

+2 votes
LTE: Why the same Kenb can't be used for handover from one eNodeB to another another ?

What is the reasoning behind to use different security keys after moving from one eNodeB to another eNodeB (Handover) ?

...