From 36.213 ---
5.1.1.1 UE Behaviour
PUSCH is a UE specific correction value, also referred to as a TPC command and is included in PDCCH with DCI format 0 or jointly coded with other TPC commands in PDCCH with DCI format 3/3A whose CRC paritybits are scrambled with TPC-PUSCH-RNTI
- If the TPC command PUSCH is included in a PDCCH with DCI format 0 where the CRC is scrambled by the Temporary C-RNTI
- The UE attempts to decode a PDCCH of DCI format 0 with the UE’s C-RNTI or SPS CRNTI and a PDCCH of DCI format 3/3A with this UE’s TPC-PUSCH-RNTI in everysubframe
5.1.2.1 UE Behaviour
PUCCH is a UE specific correction value, also referred to as a TPC command, included in a PDCCH with DCIformat 1A/1B/1D/1/2A/2 or sent jointly coded with other UE specific PUCCH correction values on a PDCCHwith DCI format 3/3A whose CRC parity bits are scrambled with TPC-PUCCH-RNTI.
- The UE attempts to decode a PDCCH of DCI format 3/3A with the UE’s TPC-PUCCH-RNTI and one or several PDCCHs of DCI format 1A/1B/1D/1/2A/2 with the UE’s C-RNTI or SPS C-RNTI on every subframe except when in DRX.
- If the UE decodes a PDCCH with DCI format 1A/1B/1D/1/2A/2 and the corresponding detectedRNTI equals the C-RNTI or SPS C-RNTI of the UE, the UE shall use the δ PUCCH provided in that PDCCH.
