top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

Can anyone say what happens when MME does not support the security algorithms sent by UE

+1 vote
1,122 views
Can anyone say what happens when MME does not support the security algorithms sent by UE
posted Jun 25, 2014 by anonymous

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

2 Answers

0 votes

Check the following section 33.102 (mine is release 11 document) section 6.4.2 which says -

1) If the MS and the network have no versions of the UEA algorithm in common and the network is not prepared to use an unciphered connection, then the connection shall be released.
2) If the MS and the network have no versions of the UEA algorithm in common and the user (respectively the user's HE) and the network are willing to use an unciphered connection, then an unciphered connection shall be used.
3) If the MS and the network have at least one version of the UEA algorithm in common, then the network shall select one of the mutually acceptable versions of the UEA algorithm for use on that connection.

This text looks to be 3G text but logically the behavior should be same for LTE too. Comments welcome.

answer Jun 25, 2014 by Salil Agrawal
Thanks for your reply Salil, But what about integrity algorithm
As per my understanding UE and Network should negotiate it as it is used by subsequently in case if support is not there connection should be released.
0 votes

MME shall send attach reject with EMM cause "UE security capabilities mismatch".
Please go though 3GPP specification 24.301.

As per my knowledge, there are three algorithms NULL, SNOW 3G and AES for both integrity as well as ciphering. Take a case MME supports only AES and UE supports NULL and SNOW 3G, in that case MME responds with Attach reject.

answer Jun 25, 2014 by Rupam
Similar Questions
+2 votes

What is the objective to send the ESM Information Request message to UE ? Does it part of attach procedure ?

+2 votes

After receiving this indication from the UE, what type of procedures MME can initiate ?

+4 votes

I saw a scenario where an Identity is requested by MME after successful Authentication and Security mode complete.. As a Response to this message UE is Sending IMEI? what is the need of checking IMEI number after successful authentication? If IMEI is in block list then ongoing Attach procedure is going to be Terminate...? Identity Request intention is mainly to check the IMEI belongs to any one of Black, while or Green list then why cannt MME check for this before Security Mode?

+1 vote

I know tracking area list is provided by MME to UE to track UE in idle mode. I want to know what is the purpose of having different kind of tracking area type like "consecutive tracking area codes belonging to one plmn" , "non-consecutive tracking area codes belong to one PLMN".

...