top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

How to bind NF_ARP family in netfilter queue

0 votes
741 views

Is it possible to bind multiple address families in netfilter queue? I see IPv4 show up in my queue, but not ARP. With error code removed, here is how I'm calling nfq_bind:

netfilterqueue_handle = nfq_open();
netfilterqueue_queue = nfq_create_queue( netfilterqueue_handle, 0,

nfq_bind_pf( netfilterqueue_handle, AF_INET );
nfq_bind_pf( netfilterqueue_handle, NF_ARP );

I'm thinking the more likely possibility is the iptable rules I'm using to send traffic to the queue are too restrictive. Here are the rules I have:

# Generated by iptables-save v1.4.21 on Sat Feb 14 10:40:46 2015
*nat
:PREROUTING ACCEPT [161:14105]
:INPUT ACCEPT [56:4995]
:OUTPUT ACCEPT [56:4496]
:POSTROUTING ACCEPT [56:4496]
-A POSTROUTING -s 10.0.1.0/24 -o eth0 -j MASQUERADE
COMMIT
# Completed on Sat Feb 14 10:40:46 2015
# Generated by iptables-save v1.4.21 on Sat Feb 14 10:40:46 2015
*filter
:INPUT ACCEPT [1017:217421]
:FORWARD DROP [53:2307]
:OUTPUT ACCEPT [934:211104]
:MYRA - [0:0]
-A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j MYRA
-A FORWARD -s 10.0.1.0/24 -o eth0 -m conntrack --ctstate NEW -j MYRA
-A MYRA -j NFQUEUE --queue-num 0 --queue-bypass
COMMIT
# Completed on Sat Feb 14 10:40:46 2015

Do I have to add another FORWARD line to get ARP to jump to MYRA? What would it look like?

posted Feb 14, 2015 by anonymous

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

1 Answer

0 votes

You need to use ebtables to get arp messages. iptables and ip6tables only get IP and IPv6 traffic.

answer Feb 14, 2015 by Majula Joshi
Similar Questions
+1 vote
How to check whether any netfilter rules are set on a host

Is there a way to find out if there any iptables rules set on a machine ?

There are some indirect ways which will not always work; for example, I know that on most hosts, iptables -S will return the following output (when no iptable rules are set)
-P INPUT ACCEPT
-P FORWARD ACCEPT
-P OUTPUT ACCEPT

So you can check whether or not the number of output lines is greater than 3 (as an indication of whether or not iptables rules are set). But there are hosts on which there are more chains then these 3; these chains are set by application/services, even without any iptable rules which are set. And after running iptables -F on these machines, iptables -S will still show more than 3 chains, even that there are no iptables rules set in these chains.

So the question is - is there a way to know whether or not netfilter rules are set on a host, regardless of the number of chains ?

+1 vote
How to realize if packet has traversed from Netfilter

I know that packet traverses through the Net Filter hooks but how to practically realize that, any suggestions...

0 votes
How to Filtering and Queue the Packets of a Process using Iptable?

I am trying to queue the packets of a process so I can use libnetfilter_queue to modify them.

I read in the documentation that I should use --pid-owner processid to filter packets of a process and iptables -I 

  -j NFQUEUE --queue-num  to add them to the queue.

I read the documentation but I am still confused how to do this. If any one can help me to understand this command I would appreciate it a lot.

+5 votes
IPTable: How to forward http traffic to two IPs

I want to forward all http traffic coming in from a perticular IP at local port 8080, to 2 particular IP Addresses (port 80). Is it enough to prepend the following in my IPtable

-A PREROUTING -s xx.xx.xx.xx/24 -p tcp --dport 8080 -j DNAT --to-destination xxx.xxx.xxx.xxx:80
-A PREROUTING -s xx.xx.xx.xx/24 -p tcp --dport 8080 -j DNAT --to-destination yyy.yyy.yyy.yyy:80

+1 vote
Netfilter: adding a multiport rule

How do I add a multiport rule

 nft add rule ip filter output tcp dports 99,200 ip daddr 1.1.1.1
 counter meta oif eth0 fails.

I see that the range works,

 nft add rule ip filter output tcp dport 99-105 ip daddr 1.1.1.1
 counter meta oif eth0
...