top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

How many DRB's in LTE? can some one explain their Functions?

+3 votes
7,010 views
How many DRB's in LTE? can some one explain their Functions?
posted Sep 16, 2013 by Giri Prasad

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

1 Answer

+4 votes

Answer is 8. As per Table B.1-1 of 36.331 following DRB combinations are supported, based on featureGroupIndicators, received in UE capability information message .

Case 1 ( Bit 7 and bit 20 are set 1 ) :

SRB1 and SRB2 for DCCH + 8x AM DRB    OR   SRB1 and SRB2 for DCCH + 5x AM DRB + 3x UM DRB

Case 2 ( BIT 7 is set 0 and BIT 20 is set to 1) :

SRB1 and SRB2 for DCCH + 8x AM DRB

Case 3 ( BIT 7 and BIT 20 are set to any value ie 0/1) :

SRB1 and SRB2 for DCCH + 4x AM DRB

Case 4 ( BIT 7 is set to 1 and BIT 20 is set to any value 0/1) :

SRB1 and SRB2 for DCCH + 4x AM DRB + 1 UM DRB

I hope this should clarify ur doubt.

answer Sep 16, 2013 by Luv Kumar
Thank You for your earliest Response.
can u please explain little more about the BIT 7 and BIT 20? why depends on this value only RLC mode is changing?
Not sure what u are trying to ask, let me explain bit 20 and Bit 7 -
Regardless of what bit number 20 is set to, if bit number 7 is set to ‘1’, UE shall support at least SRB1 and SRB2 for DCCH + 4x AM DRB + 1x UM DRB
Similar Questions
+1 vote

Hi All,

It is mentioned in different websites that in LTE max. of 8 DRB can be established per UE. But as per page 652 of 36.331 V13.2.0, the max no. of DRB is 11.
"maxDRB INTEGER ::= 11 -- Maximum number of Data Radio Bearers"

Based on what source are we saying that max. DRB in LTE is 8 and not 11.

It was mentioned in one of the old threads the following:

If EPS bearer ID is = x +4 ;
Then
DRB ID = x;
Logical Channel ID = x + 2

I found the above relationship of DRB ID & EPS Bearer ID to be true for one of the eNB vendors but not for another one.

Example:
EPS ID is 5 and DRB ID is 4 instead of 1. Can somebody comment in this?
NOTE : All these ranges is with respect to DRB establishment

EPS Bearer ID Range is INTEGER (0..15) (But 0-4 is reserved so we use starting from 5 )
DRB ID Range is INTEGER (1..32) (As in LTE max 8 DRB can be established per UE so we use from 1-8)
Logical Channel ID range for DRBs is INTEGER (3..10) ( For for DRB1 we use 3 as logical channed ID)

Thanks

+1 vote

Why the numbers of SRB’s and DRB’s are fixed as 3 and 8 in LTE?

0 votes

Is EPS bearer ID and RAB ID common for all UE ? or RAB ID will be unique for default bearer ?
Please, explain

+1 vote

As we know Per Resource Blocks (RB) SINR from UE report. I know that an UE reports all the RBs SINR as quick as possible (maybe each subframe period, that is 1 ms). I’m thinking of the Higher Layer-configured subband CQI report since it’s the most capable of inspecting the RBs status as I saw in 3GPP 36.213 Table 7.2.1-1. I’m interested in FDD; unfortunately the least “RB contiguous number” is 4 as in Table 7.2.1-3. Do we have a better method capable to inspect each RB?

+1 vote

I have very limited insight in mutlimedia multicast/broadcast services. An article says one LTE cell can have maximum of 8 MCCH channels and each MCCH configuration corresponds to configuration of one MBSFN area.
If this is correct then it concludes that one LTE cell can be part of max 8 MBSFN areas.

Each MBSFN area can be used to broadcast multiple multicast/broadcast services.
Now I want to how many TV channels (a kind of broadcast/multicast service) can be broadcasted ?
One related query is how an UE come know about the channels such as DD news, ESPN etc are being broadcasted in cell ?

...