top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

How UE knows the maximum MCS capacity of EnodeB?

0 votes
1,121 views

From UE capability Information enodeB will get to know the max DL/UL MCS supported by UE. Then How UE knows the max DL/UL MCS supported by enodeB.

posted Nov 28, 2017 by Jagadish Nagaraddi

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

2 Answers

+1 vote

Enb broadcasts ul 64qam supported in sib2. From sib2, ue knows about 64 qam support in ul.

On the basis of ue capability, enb informs 256qam support in dl through rrc reconfiguration. Ie for 256qam support in dl in rrc reconfiguration is altCQI-Table-r12.

answer Nov 28, 2017 by Veer Pal Singh Yadav
0 votes

UE doesn't know about ENB capability, Why does UE wants this information?How ever ENB will select MCS for UL/DL based on UE capability so which ever MCS ENB selected is supported be ENB and UE.

answer Nov 28, 2017 by Jaganathan
Thanks for your answer.. Few things to know are.. In which message enodeB indicate to UE about the selected MCS? Suppose UE is capable of supporting 256QAM in downlink.. but enodeB can support only 64QAM in downlink... How UE is notified about MCS of EnodeB.
commented Nov 28, 2017 by Jagadish Nagaraddi
Hi,
ENB will send selected MCS in DL DCI message to UE. based on this UE will come to know ENB MCS for DL data.
commented Nov 28, 2017 by Jaganathan
During Attach procedure eNB will receive the UE capability information. Further eNB has to configure MAC according to negotiated values between eNB supported and UE supported.

Even though UE supported 256QAM, eNodeB also should be capable of that..
commented Nov 29, 2017 by Katakam Ranjit Kumar
Similar Questions
+3 votes
LTE: Does the eNodeB inform UE to use a specific MCS for the allocated resource in PUSCH ?

EnodeB considers CQI feedback from the UE before creating the transport block.
As per my understanding PUCCH resource allocation is not very dynamic. In this case how UE decide to use a specific MCS (Modulation and Coding Scheme) while using PUCCH channel ?

+1 vote
Why the minimal MCS chosen by the eNodeB for the user?

As far as I know eNodeB calculates the number of Physical Resource Blocks allocated to each UE, based on the specific metric, then takes the minimal modulation and coding scheme to deduce the transport block size that must be allocated to each user, Why this minimal MCS ? Isn't it too sub-optimal?

+3 votes
LTE: How Network knows exactly when the UE is going to transmit the RACH?

Actually i am trying to learn RACH procedures and getting lots of hurdles to understand. I am posting my queries whatever is coming to my mind so that i will get the descriptive answers. I hope someone will help me here to learn it. Thanks in advance.

0 votes
how ue knows which cells it needs to measure while handover

while performing handover ue needs to scan neighbour cells for handover ue usually don't have access to all cells to measure(measurement event/report) then how come ue will know which cells it needs to measure?

...