top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

What is the need of establishing srb1 if srb0 is already established?

+2 votes
839 views
What is the need of establishing srb1 if srb0 is already established?
posted Sep 26, 2014 by Puneet Agarwal

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

1 Answer

+3 votes

In LTE, there are 3 signalling radio bearers are defined.

- SRB - 0 : which is nothing but common control channel. As soon as the cell setup procedure is finished, it becomes operational. It is not dedicated for an UE. Every UE uses this channel to send initial RRC messages.

- SRB - 1: It is associated with UE. Every UE has its own dedicated signalling radio bearer. As the time of RRC connection setup procedure , it is established.

-SRB-2: It is another dedicated signalling radio bearer which is mainly used to NAS messages. It is an optional signalling radio bearer. Even if this is not present SRB1 shall be used for both RRC and NAS signalling messages.

answer Sep 26, 2014 by Vimal Kumar Mishra
Thanks Vimal
commented Sep 26, 2014 by Puneet Agarwal
Similar Questions
+1 vote
Numbers of SRB and DRB in LTE

Why the numbers of SRB’s and DRB’s are fixed as 3 and 8 in LTE?

0 votes
If One PS call is already established in LTE network and same UE are making a cs call , what happened ?

If One PS call is already established in LTE network and same UE are making a cs call , what happened ? PS call will drop or paused? if CSFB enabled in Network.

+1 vote
Do we have a better method, capable to inspect each RB?

As we know Per Resource Blocks (RB) SINR from UE report. I know that an UE reports all the RBs SINR as quick as possible (maybe each subframe period, that is 1 ms). I’m thinking of the Higher Layer-configured subband CQI report since it’s the most capable of inspecting the RBs status as I saw in 3GPP 36.213 Table 7.2.1-1. I’m interested in FDD; unfortunately the least “RB contiguous number” is 4 as in Table 7.2.1-3. Do we have a better method capable to inspect each RB?

...